China factory Factory Supply Plastic Mc Nylon Pulley pulley drive

Product Description

Plastic Mc Nylon Pulley

Mc nylon, means monomer casting nylon, is a kind of engineering plastics used in comprehensive industries, has been applied almost every industrial field.
The caprolactam monomer is first melted, and added catalyst, then poured it inside moulds at atmosphere pressure so as to shape in different castings, such as: Rod, plate, tube. The molecule weight of mc nylon can reach 70, 000-100, 000/mol, 3 times than pa6/pa66. Its mechanical properties are much higher than other nylon materials, such as: Pa6/pa66. Mc nylon plays a more and more important role in the material list recommended by our country.

Since the end of 1980’s, HangZhou engineering plastics industireis company has devoting herself on developing the technology of mc nylon modification, greatly extended the applications in different industries. Basing on the mc nylon, reinforced with variety of additives during the reaction, such as lubricant, molybdenum disulfide, graphite glass fiber, carbon fiber etc, to improve the properties, higher performance of wear-resistance, corrosion-resistance, self-lubrication, vibration-absorption, noise-absorption. At the same time, as the technics and structure of the moulds is quite simple, so that it can be manufactured in lower cost, becomes the ideal substitutes of bronze, stainless steel, babbitt alloy, ptfe and so on.

Oil nylon (green)
Oil nylon(green)is the new engineering plastics that developed by HangZhou engineering plastics industireis company in the later 1980’s by importing the advanced technology from nylacast co., ltd, uk, was the first authentic lubricating nylon that builds the liquid lubricant system during the processing stage, which makes its coefficient of friction is 50% lower than the general pa6 or pa66, the wear-resistance is 10 times than the general ones. Oil nylon is specially developed for the parts of non-self-lubrication, heavy-loading and low-speed-running, which obviously resulted in a substantial increase in bearing life- 5 times that of general pa6 and 25 times that of phosphor bronze! The lubricant contained within the material will not drain, adsorb or dry out and never needs replenishment. The uniform distribution of the lubricant throughout the product guarantees the constant performance of the parts over the whole service life and improvements in rate of wear, sliding frictional properties, abrasion resistance and stick slip performance, which are just a few of the benefits offered by this material. Oil nylon has been successful in considerable enlarging the application of nylon in many industries and specifically for some un-lubricated running parts.

Other casting nylon:
Oil nylon + carbon (black)
Oil nylon added carbon, has the very compact and crystal structure, which is better than the general casting nylon in the performance of high mechanical strength, wear-resistance, anti-aging, uv resistance and so on. It is suitable for making the bearing and other wear mechanical parts.

Oil mc901(blue)
This improved mc nylon, has striking blue color, which is better than general pa6/pa66 in the performance of toughness, flexibility, fatigue-resistance and so on. It is the perfect material of gear, gear bar, transmission gear and so on.

Mc nylon + mso2(light black)
Mc nylon added mso2 can remain the impact-resistance and fatigue-resistance of casting nylon, as well as it can improve the loading capacity and wear-resistance. It has a wide application in making gear, bearing, planet gear, seal circle and so on.

Property Item No. Unit MC Nylon (Natural) Oil Nylon+Carbon    (Black) Oil Nylon (Green) MC90 (Blue) MCNylon+MSO2(Light Black)
Mechanical Properties 1 Density g/cm3 1.15 1.15 1.135 1.15 1.16
2 Water absorption   (23ºCin air) % 1.8-2.0 1.8-2.0 2 2.3 2.4
3 Tensile strength MPa 89 75.3 70 81 78
4 Tensile strain at break % 29 22.7 25 35 25
5 Compressive stress   (at 2%nominal strain) MPa 51 51 43 47 49
6 Charpy impact strength (unnotched) KJ/m 2 No brak No break ≥50 No BK No break
7 Charpy impact strength (notched) KJ/m 2 ≥5.7 ≥6.4 4 3.5 3.5
8 Tensile modulus of elasticity MPa 3190 3130 3000 3200 3300
9 Ball indentation hardness N/mm 2 164 150 145 160 160
  10 Rockwell hardness M88 M87 M82 M85 M84

Material: PA
Size: According to Drawing or Sample
Color: Natural, White, Black, Green, Blue
Tooling: CNC Lathe
Transport Package: Packing in Paper Carton and Wooden Pallet
Specification: RoHS


Customized Request

plastic pulley

How do plastic pulleys contribute to the functioning of exercise and gym equipment?

Plastic pulleys play a significant role in the functioning of exercise and gym equipment. Here’s a detailed explanation:

1. Cable and Pulley Systems:

Many exercise machines, such as cable machines or functional trainers, utilize cable and pulley systems for resistance training. Plastic pulleys are an integral part of these systems as they guide and redirect the cables, allowing users to perform various exercises. The smooth rotation of plastic pulleys ensures consistent and friction-free movement of the cables, enabling users to engage in resistance training with controlled and targeted muscle activation.

2. Adjustable Resistance:

Plastic pulleys contribute to the adjustable resistance feature in gym equipment. By incorporating pulleys with different diameters or sizes, equipment manufacturers can vary the mechanical advantage and resistance experienced by users. Adjusting the position of the cable on different pulleys alters the resistance profile, providing users with a wide range of resistance levels to cater to their fitness goals and capabilities.

3. Smooth and Controlled Movements:

Plastic pulleys facilitate smooth and controlled movements during exercise routines. They offer low friction and excellent rotational capabilities, ensuring that the cables move freely and without jerks or interruptions. This smoothness allows users to perform exercises with proper form, reducing the risk of injury and providing a more comfortable workout experience.

4. Multiple Exercise Options:

Plastic pulleys enable the versatility of exercise and gym equipment by providing multiple exercise options. Gym machines equipped with pulley systems offer a wide range of exercises that target different muscle groups. Users can perform exercises such as chest presses, lat pulldowns, cable curls, and many more, all made possible by the smooth operation and flexibility of plastic pulleys.

5. Durability and Low Maintenance:

Plastic pulleys are known for their durability and low maintenance requirements. They are resistant to corrosion, wear, and impact, making them suitable for the demanding environment of gym equipment. Plastic pulleys require minimal lubrication and can withstand the repetitive and high-intensity movements associated with exercise machines. Their long-lasting nature reduces the need for frequent replacements and ensures consistent performance over time.

6. Noise Reduction:

Plastic pulleys contribute to noise reduction in exercise and gym equipment. The smooth rotation and low friction of plastic pulleys help minimize noise generated during the operation of cable and pulley systems. This is particularly important in commercial gyms or home environments where a quiet workout atmosphere is desired.

7. Portability and Lightweight Design:

In the case of portable exercise equipment or machines with adjustable features, plastic pulleys offer the advantage of being lightweight. The use of plastic pulleys reduces the overall weight of the equipment, making it easier to transport or move around. This is beneficial for users who prefer to exercise in different locations or need to store the equipment when not in use.

In summary, plastic pulleys are essential components in exercise and gym equipment. They contribute to the smooth operation of cable and pulley systems, enable adjustable resistance, facilitate controlled movements, offer multiple exercise options, provide durability with low maintenance, reduce noise, and offer portability. By incorporating plastic pulleys into their designs, manufacturers can enhance the functionality and user experience of exercise equipment, allowing individuals to engage in effective and versatile workouts for improved fitness and well-being.

plastic pulley

What safety considerations should be kept in mind when using plastic pulleys?

When using plastic pulleys, several safety considerations should be kept in mind to ensure the well-being of operators and the proper functioning of machinery or equipment. Here’s a detailed explanation:

1. Load Capacity:

One important safety consideration is to ensure that the plastic pulleys are selected and designed to handle the anticipated loads and forces in the application. Exceeding the load capacity of the pulleys can lead to premature failure, belt or chain slippage, or even catastrophic accidents. It is essential to consult the manufacturer’s specifications and guidelines to determine the maximum load capacity of the plastic pulleys and ensure they are not overloaded.

2. Material Compatibility:

Consider the compatibility of the plastic pulley material with the surrounding environment and the materials it comes into contact with. Some chemicals, solvents, or extreme temperatures may adversely affect certain types of plastic. Ensure that the chosen plastic material is resistant to the specific chemicals or conditions present in the application to avoid material degradation, weakening, or failure of the pulleys.

3. Proper Installation:

Correct installation of plastic pulleys is crucial for safety. Follow the manufacturer’s instructions and guidelines for proper pulley installation, including mounting options, alignment, and fastening mechanisms. Improperly installed pulleys can lead to misalignment, belt or chain disengagement, excessive vibrations, or other operational issues that compromise safety. Ensure that pulleys are securely attached and aligned to prevent accidents or damage to the machinery or equipment.

4. Guarding and Enclosures:

Consider incorporating appropriate guarding and enclosures around the plastic pulleys to prevent accidental contact with moving parts. This is especially important in conveyor systems or machinery where operators or maintenance personnel may need to interact with the pulleys. Guards and enclosures help prevent injury caused by entanglement, pinching, or getting caught in the rotating components, enhancing overall safety in the work environment.

5. Regular Inspection and Maintenance:

Regular inspection and maintenance of plastic pulleys are essential for identifying any signs of wear, damage, or degradation. Inspect the pulleys periodically to check for cracks, excessive wear, or any other visible issues. Replace any damaged or worn-out pulleys promptly to avoid unexpected failures or accidents. Additionally, follow the manufacturer’s recommendations for lubrication, cleaning, or any other maintenance procedures to ensure the pulleys function optimally and safely.

6. Training and Awareness:

Proper training and awareness among operators and maintenance personnel are essential for safe operation and handling of machinery or equipment with plastic pulleys. Ensure that personnel are trained on the correct procedures for operating, maintaining, and troubleshooting the equipment. They should be aware of the potential hazards associated with plastic pulleys and understand the safety protocols to follow, including lockout/tagout procedures, emergency stop mechanisms, and personal protective equipment requirements.

7. Compliance with Regulations:

Ensure that the use of plastic pulleys complies with relevant safety regulations, standards, and guidelines specific to the industry or region. Different industries may have specific requirements for safety, such as those related to food processing, hazardous environments, or machinery certification. Adhering to these regulations helps ensure that the plastic pulleys and associated machinery or equipment meet the necessary safety standards.

By considering these safety considerations when using plastic pulleys, operators can minimize risks, prevent accidents, and ensure the safe and efficient operation of machinery or equipment in various industrial applications.

plastic pulley

Can you explain the key features and advantages of plastic pulleys?

Plastic pulleys offer several key features and advantages that make them suitable for various applications. Here’s a detailed explanation of the key features and advantages of plastic pulleys:

1. Lightweight:

One of the significant features of plastic pulleys is their lightweight construction. Compared to metal pulleys, plastic pulleys are considerably lighter, which can be advantageous in applications where weight reduction is desired. The lightweight nature of plastic pulleys makes them suitable for applications where minimizing overall system weight is important, such as in portable devices or equipment.

2. Corrosion Resistance:

Plastic pulleys are inherently resistant to corrosion. Unlike metal pulleys that may rust or corrode when exposed to moisture or certain chemicals, plastic pulleys maintain their integrity and functionality even in corrosive environments. This corrosion resistance makes plastic pulleys suitable for applications where exposure to moisture or chemicals is likely, such as in marine equipment or outdoor machinery.

3. Low Friction:

Plastic pulleys generally have low friction coefficients. This means that the contact between the pulley and the associated components, such as belts or ropes, is smoother, resulting in reduced frictional losses. The low friction properties of plastic pulleys contribute to improved efficiency and energy savings in various systems, such as conveyor belts, where reducing power consumption is desirable.

4. Noise Reduction:

Plastic pulleys offer inherent damping properties, which help reduce noise and vibration during operation. The damping effect of plastic materials absorbs vibrations and minimizes noise generation, resulting in quieter operation compared to metal pulleys. This makes plastic pulleys suitable for applications where noise reduction is important, such as in household appliances or office equipment.

5. Design Flexibility:

Plastic pulleys offer a high degree of design flexibility. They can be molded into various shapes, sizes, and configurations, allowing for precise customization. This flexibility in design enables specific features, such as flanges, grooves, or mounting options, to be incorporated directly into the pulley. Plastic pulleys can be tailored to meet the unique requirements of different applications, making them highly versatile in terms of design possibilities.

6. Cost-Effective:

Plastic pulleys are generally more cost-effective compared to pulleys made from other materials, such as metal, ceramic, or glass. The manufacturing process for plastic pulleys is typically less complex and less expensive, resulting in lower production costs. This cost advantage makes plastic pulleys a cost-effective choice for a wide range of applications, especially in situations where budget constraints are a consideration.

7. Electrical Insulation:

Plastic pulleys offer electrical insulation properties. Unlike metal pulleys that conduct electricity, plastic pulleys act as insulators, preventing the flow of electrical current. This electrical insulation characteristic is advantageous in applications where electrical conductivity needs to be avoided or isolated, such as in electronic devices or systems with sensitive electrical components.

8. Chemical Resistance:

Plastic pulleys exhibit resistance to various chemicals, depending on the specific plastic material used. They can withstand exposure to substances such as oils, fuels, solvents, and acids without degradation. This chemical resistance makes plastic pulleys suitable for applications where contact with chemicals or aggressive substances is expected, such as in industrial machinery or chemical processing equipment.

In summary, plastic pulleys offer key features and advantages including lightweight construction, corrosion resistance, low friction, noise reduction, design flexibility, cost-effectiveness, electrical insulation, and chemical resistance. These attributes make plastic pulleys suitable for a wide range of applications across industries such as automotive, consumer electronics, manufacturing, and more.

China factory Factory Supply Plastic Mc Nylon Pulley   pulley driveChina factory Factory Supply Plastic Mc Nylon Pulley   pulley drive
editor by CX